Stainless steel polishing machine for the sheet and coil with the No.4 and No.3 Sanding pattern
The no.4 machine:
1. This machine is made of the laminating steel ( JIS standard ), the speed of the whole line is could be adjust by the control panel, and the fastest speed is 60 M/ min, but now you can see the speed from the control panel.
2. The main working part is the grinding head-roller, this part will rotate during the sheet entering into the central,
3. The both side of the roller is conveying rolls, its covered with the rubber, and control the direction of the feeding.
4. The top and the bottom side is grinding roll and the bottom roll, the grinding bearing could be lifted and down by the control panel, but the flower roller covered by the rubber, the range of lifting and downing separated the micro adjusting and substantial.
5.The surface of the roll is rubber and JIS standard stainless steel. The basic sheet selection is to be of 2B or BA sheet and should be preferably polished with 150#, 180# abrasive belt.
6. The application verticals of this finish to name a few are in cookware, furniture, elevator, architectural decoration, revolving door, exterior decoration etc.
Soctch bite--Satin finish:
1. The basic sheet selection should preferably be of No.4 satin surface stainless steel sheet and should be subjected to polish with abrasive wheels or pads.
2. The application verticals of this finish to name a few are in architecture decoration, elevators and escalators, furniture, etc.
3. The line of the polishing machine, it needs the stainless steel plate with the SB sanding pattern, and for process, the sanding roller to process the plate. The size of the sanding roller is based on the size of the plate.
Audited Supplier 
){kind=link}
){kind=link}